Product Description
If you're looking to shed some unwanted pounds or build a high output fuel system our 1G DSM bolt in fuel cell will do just that. CNC laser cut from 1/8" 3003 aluminum featuring TIG welded seams.
Each unit comes standard with a billet aluminum fuel ring that will allow you to bolt in your OEM fuel sending unit for in-tank pump operation or if you just want to keep your fuel level gauge functional. Also standard is an external fuel pump mounting plate on the side of the tank. A -10AN push lock fitting for the OEM vent line is also included. Baffles inside the fuel cell eliminate fuel sloshing and help with fuel distribution during harsh driving conditions. Anodizing is recommended but not required when running E85. If you choose not to anodize the fuel cell and want to run E85 be sure to drain out the E85 after each use. Long term storage of E85 in the fuel cell can corrode aluminum.
Capacity is roughly 10 gallons, unit bolts to existing mounting points and retains the OEM filler neck as well. If choosing to use your stock return line you will need to purchase a -6AN push lock fitting that will accept the OEM rubber line. (Summit P/N SUM-220711)
Fits AWD models only!
***FOR OFF-ROAD USE ONLY, 10 GALLONS WILL NOT GET YOU VERY FAR! PLEASE NOTE MANY RACE TRACKS AND SANCTIONING BODIES MAY REQUIRE AN ADDITIONAL SHIELD AROUND THE CELL FOR PROTECTION, PLEASE CHECK THE RULE BOOK!***
***SHIPS UPS OVERSIZE, ADDITIONAL FEES APPLY***
